The EIS in Safety Certification is Electrical Insulation System, also named as Insulation System.
The Insulation System Class is a temperature class of an insulation system that is numerically equal to a maximum hot-spot operating temperature. The methods of measuring temperatures and determining hot-spot temperature allowances are specified in end-use standards. [Note]
105 (A) 105 120 (E) 120 130 (B) 130 155 (F) 155 180 (H) 180 200 (N) 200 220 (R) 220 240 (S) 240 Over 240 (C) Over 240 Please feel free to contact us, if you need to apply UL EIS Certification or Product Safety Certification Service! Contact: Ms. Chris Chen (twsales@great-c.com) (GCS Safety team)
1 Comment
The EIS in Safety Certification is Electrical Insulation System, also named as Insulation System.
In accordance with UL 1446, the Insulation System is a unique intimate combination of two or more insulating materials, likes magnet wire, ground insulation, varnish, lead wire insulations, and outer wrapping of a coil…, used in electrical equipment. These intimate combinations are evaluated as unique groups. Any material or component existing outside the outer wrap of the device or not in contact with the windings is not determined to be part of the insulation system. [Safety Standards]
The main focus of the blades of attachment plugs application for UL Certification.
In accordance with UL 1659, the blades of attachment plugs intended to be connected to the conductors of flexible cords using crimped connections, for use on cord sets and power-supply cords need UL Certification. The main focus of the blades of attachment plugs application for UL Certification are material, dimensions and crimping assemblies. The most common failure in applying UL Certification is the reliability of blades crimping assemblies. [Note]
Does the Attachment Plug Blades need UL Certification?
Not all of the blades of attachment plugs need UL Certification. In accordance with UL 1659, only the blades of attachment plugs intended to be connected to the conductors of flexible cords using crimped connections, for use on cord sets and power-supply cords need UL Certification. [Note]
CB is an international certification scheme but not a certification logo.
The CB Scheme is an international program created by the IEC System of Conformity Assessment Schemes for Electrotechnical Equipment and Components (IECEE) for the acceptance of product safety test results among participating laboratories and certification organizations around the world. The CB Scheme offers manufacturers a simplified way of obtaining multiple national safety certifications for their products. [Note]
(GCS Safety Team) China State Administration of Market Regulation (SAMR), published a notice on June 15, 2018, announcing changes to the China Compulsory Certificate (CCC-Certificate) program.
From Oct. 1st, 2018, some products will be allowed to choose self-declaration/ self-evaluation. Besides getting certified by authorized certification bodies (agencies), involved companies can prove that their products conform to the requirements of CCC-Certificate by conducting self-declaration and self-evaluation in the light of China’s “Implementing Rules of Self-declaration for CCC-Certificate Products”, and reporting conformity information to relevant departments. You need to know the new CCC catalog and choose the suitable program before being exported to or sold in China market. If you need China CCC application or Safety Certification service, Please contact us. Note: The CCC Mark is China Compulsory Certification mark. CCC stands for “China Compulsory Certification”, also named “CCC” or “3C”. (GCS Safety Team) China State Administration of Market Regulation (SAMR), published a notice on June 15, 2018, announcing changes to the China Compulsory Certificate (CCC-Certificate) program.
As of June 15, 2018, the CCC- Certificate management product categories will be reduced from 160 to 141. From the date of releasing this announcement, some products are no longer subject to the CCC-Certificate management and their authorized certification agencies should cancel CCC Certificates which have been issued before. You need to know the new CCC catalog before being exported to or sold in China market. Please contact us, if you need China CCC application or Safety Certification service. Note: The CCC Mark is China Compulsory Certification mark. CCC stands for “China Compulsory Certification”, also named “CCC” or “3C”. (GCS Safety Team) China State Administration of Market Regulation (SAMR), published a notice on June 15, 2018, announcing changes to the China Compulsory Certificate (CCC-Certificate) program.
From Oct. 1st, 2018, some products will be allowed to choose self-declaration/ self-evaluation instead of existing methods for China CCC-Certificate. According to the China’s “Implementing Rules of Self-declaration for CCC-Certificate Products”, there are two Self-declaration/ Self-evaluation procedures for CCC-Certificate: • Self-declaration Procedure A: Type testing by optional lab. + Self-declaration • Self-declaration Procedure B: Type testing by designated lab. + Self-declaration You can choose the suitable procedure in accordance with your product categories to complay with compulsory product certification requirements in China. Please feel free to contact us, If you need China CCC application or Safety Certification service. Note: The CCC Mark is China Compulsory Certification mark. CCC stands for “China Compulsory Certification”, also named “CCC” or “3C”. (GCS Safety Team) The CCC Mark is China Compulsory Certification mark. CCC stands for “China Compulsory Certification”, also named “CCC” or “3C”.
China State Administration of Market Regulation (SAMR), published a notice on June 15, 2018, announcing changes to the China Compulsory Certificate (CCC-Certificate) program. The notice focuses on the following aspects:
Please contact us, if you need China CCC application or Safety Certification service. GCS Safety Team The ATEX Directive consists of two EU Directives, there are “ATEX Directive 2014/34/EU” & “ATEX Directive 1999/92/EC”.
|